Fire Suggested cure setting
pretreat and ink settings
downloads and links
hirsch solutions
Visit Hirsch for all your DTG needs
The DragonAir curing systems are designed specifically to cure pretreat and digital inks. Below is a listing of suggested starting settings. Use these to set up your system and update according to your production requirements. Your final settings will vary based on the power available and your environment. Adjust accordingly.
| Standard | Delicate | Sweatshirt | 50/50 | |
|---|---|---|---|---|
| Grams of Pretreat | 32 | 32 | 40 | 36 |
| IR Bump | 35% | 35% | 50% | 35% |
| Temperature Setting | 305°F | 305°F | 320°F | 305°F |
| Belt Speed | 1:45 | 1:45 | 2:00 | 1:45 |
| Convection | 100% | 100% | 100% | 100% |
| Heat Press Pressure | Firm | Firm | Firm | Firm |
| Heat Press Time | 10 seconds | 10 seconds | 10 seconds | 10 seconds |
| Heat Press Temperature | 300°F | 300°F | 300°F | 300°F |
| Standard | Delicate | Sweatshirt | 50/50 | |
|---|---|---|---|---|
| CCs of ink | 3.81 | 3.81 | 3.8 | 3.8 |
| IR Bump | 40% | 40% | 30% | 30% |
| Temperature Setting | 305°F | 305°F | 320°F | 305°F |
| Belt Speed | 3:00 | 3:00 | 3:00 | 3:00 |
| Convection | 100% | 100% | 100% | 100% |